Pellet · Biomass Pellet Stove Series
PS 150 Pellet Stove
Smart warmth, automatically.
The PS 150 pellet stove carries the largest hopper in our range, 32 kg, in a wide, low body – designed for customers heating around 150 m² who want the longest gaps between refills.
Heating area
150 m²
Weight
107 kg
Hopper capacity
32 kg
Technical specifications
| Model | PS 150 |
| Fuel | Wood pellets (ENplus A1 recommended) |
| Heating area | 150 m² |
| Weight | 107 kg |
| Dimensions (W × H × D) | 753 × 875 × 645 mm |
| Hopper capacity | 32 kg |
| Pellet consumption | 2.3–3.4 kg/h |
Specifications may change without notice. Heating area depends on insulation and climate.
Highlights
- Digital thermostat and timer control
- Automatic auger feed from a large hopper
- Quiet convection fan for fast heat-up
- Burns renewable wood pellets
Interested in PS 150?
Request distributor pricing, MOQ and lead time. We reply within one business day.
About the PS 150 pellet stove
At 753 mm, the PS 150 is the widest pellet stove we build, with an 875 mm height and 645 mm depth. The 107 kg body heats about 150 m², burning 2.3–3.4 kg/h from its 32 kg hopper. That broad, squat form suits a living-room feature wall where a tall stove would look out of place, and it gives a wider view of the flame. A digital thermostat, timer and convection fan handle daily operation, while the automatic auger keeps the fire fed for hours.
It shares its consumption range with the P 150, so the choice between them comes down to shape and fuel capacity rather than heat. Dealers can present the two side by side and let the interior decide. Offer the PS 150 pellet stove with your own logo and colour through our private-label programme.
Energy efficiency and premium warmth in perfect balance. Our pellet stoves feed themselves from a large hopper and hold your chosen temperature with a digital controller.
The PS 150 is part of our Pellet collection, where you can compare every size and finish side by side.
PS 150 pellet stove – frequently asked questions
How large an area does the PS 150 heat, and how many pellets does it use?
The PS 150 is rated for about 150 m² and uses 2.3–3.4 kg of pellets per hour, depending on the power setting. Insulation, ceiling height and climate all affect the real heating area, so share your floor plan if you would like us to confirm the right size.
How long does a full hopper last on the PS 150?
The PS 150 holds 32 kg of pellets. At 2.3–3.4 kg/h, a full hopper lasts roughly 9–13 hours, depending on the thermostat setting and how much heat the room demands. Lower settings stretch the burn time; running at full power on a cold day shortens it.
Which pellets should be used in the PS 150?
We recommend certified ENplus A1 wood pellets. Consistent quality means less ash, a cleaner burn pot and fewer service calls. Poor pellets with high ash or dust content can block the auger and reduce performance, so advise your customers to buy from a reliable supplier.
Is the PS 150 available for OEM, and what are the MOQ and lead time?
Yes. The PS 150 can carry your logo, colour, packaging and multilingual manuals, and can be mixed with other models in one container at a low trial MOQ. Standard models usually ship 30–45 days after deposit. Pellet electronics and other spare parts are available for after-sales service.
Which test documents are available for the PS 150?
Test reports and declarations for the relevant standard for pellet stoves, EN 14785, are available on request for qualified models. Importers should check the rules of their market before ordering. For reliable operation we recommend wood pellets certified to ENplus A1. Tell us where you sell the PS 150 and we will confirm which documents apply.
