Pellet · Biomass Pellet Stove Series
PC 100 Pellet Stove
Smart warmth, automatically.
The PC 100 pellet stove is the slimmest model in our pellet range, with a 19 kg hopper in a tall, narrow body – ideal for hallways, narrow living rooms and homes of around 100–120 m².
Heating area
100–120 m²
Weight
79 kg
Hopper capacity
19 kg
Technical specifications
| Model | PC 100 |
| Fuel | Wood pellets (ENplus A1 recommended) |
| Heating area | 100–120 m² |
| Weight | 79 kg |
| Dimensions (W × H × D) | 480 × 965 × 560 mm |
| Hopper capacity | 19 kg |
| Pellet consumption | 1.5–2.6 kg/h |
Specifications may change without notice. Heating area depends on insulation and climate.
Highlights
- Digital thermostat and timer control
- Automatic auger feed from a large hopper
- Quiet convection fan for fast heat-up
- Burns renewable wood pellets
Interested in PC 100?
Request distributor pricing, MOQ and lead time. We reply within one business day.
About the PC 100 pellet stove
Just 480 mm wide and 560 mm deep, the PC 100 takes the least floor space of any CREPUS pellet stove, while its 965 mm height houses a 19 kg hopper. At 79 kg it is also one of the lightest. It heats about 100–120 m² at 1.5–2.6 kg/h, controlled by a digital thermostat and timer, with a convection fan moving warm air into the room.
Compared with the low PC 80, it trades height for a bigger hopper and larger heating area; the PC 120 goes further still. Its narrow front makes it a favourite for apartments and renovated townhouses. ENplus A1 pellets keep the burn pot clean and service visits rare. Dealers can position the PC 100 pellet stove as the space-saving option in their range. Browse all models in the pellet collection.
Energy efficiency and premium warmth in perfect balance. Our pellet stoves feed themselves from a large hopper and hold your chosen temperature with a digital controller.
The PC 100 is part of our Pellet collection, where you can compare every size and finish side by side.
PC 100 pellet stove – frequently asked questions
How large an area does the PC 100 heat, and how many pellets does it use?
The PC 100 is rated for about 100–120 m² and uses 1.5–2.6 kg of pellets per hour, depending on the power setting. Insulation, ceiling height and climate all affect the real heating area, so share your floor plan if you would like us to confirm the right size.
How long does a full hopper last on the PC 100?
The PC 100 holds 19 kg of pellets. At 1.5–2.6 kg/h, a full hopper lasts roughly 7–12 hours, depending on the thermostat setting and how much heat the room demands. Lower settings stretch the burn time; running at full power on a cold day shortens it.
Which pellets should be used in the PC 100?
We recommend certified ENplus A1 wood pellets. Consistent quality means less ash, a cleaner burn pot and fewer service calls. Poor pellets with high ash or dust content can block the auger and reduce performance, so advise your customers to buy from a reliable supplier.
Is the PC 100 available for OEM, and what are the MOQ and lead time?
Yes. The PC 100 can carry your logo, colour, packaging and multilingual manuals, and can be mixed with other models in one container at a low trial MOQ. Standard models usually ship 30–45 days after deposit. Pellet electronics and other spare parts are available for after-sales service.
Which test documents are available for the PC 100?
Test reports and declarations for the relevant standard for pellet stoves, EN 14785, are available on request for qualified models. Importers should check the rules of their market before ordering. For reliable operation we recommend wood pellets certified to ENplus A1. Tell us where you sell the PC 100 and we will confirm which documents apply.
