Pellet · Biomass Pellet Stove Series
PC 120 Pellet Stove
Smart warmth, automatically.
The PC 120 pellet stove is the largest model of the PC line, pairing a 24 kg hopper with a wide operating range – suited to bigger family homes and open-plan spaces of 120–150 m².
Heating area
120–150 m²
Weight
93 kg
Hopper capacity
24 kg
Technical specifications
| Model | PC 120 |
| Fuel | Wood pellets (ENplus A1 recommended) |
| Heating area | 120–150 m² |
| Weight | 93 kg |
| Dimensions (W × H × D) | 540 × 965 × 625 mm |
| Hopper capacity | 24 kg |
| Pellet consumption | 1.7–3.5 kg/h |
Specifications may change without notice. Heating area depends on insulation and climate.
Highlights
- Digital thermostat and timer control
- Automatic auger feed from a large hopper
- Quiet convection fan for fast heat-up
- Burns renewable wood pellets
Interested in PC 120?
Request distributor pricing, MOQ and lead time. We reply within one business day.
About the PC 120 pellet stove
The PC 120 measures 540 × 965 × 625 mm and weighs 93 kg. Its 24 kg hopper feeds the fire at 1.7–3.5 kg/h, the broadest consumption range of any CREPUS pellet model, so owners can run it gently on mild days or push it hard in a cold snap. Heating area is about 120–150 m², with thermostat, timer and fan control as standard.
It sits above the PC 100 in capacity and between the P 100 and P 150 in heated area, filling an important gap in a dealer’s line-up. Customers who want fewer refills than the PC 100 but a smaller body than the PS 150 usually land here. Recommend ENplus A1 pellets for the PC 120 pellet stove to keep maintenance low. Our pellet vs wood comparison helps you explain the benefits.
Energy efficiency and premium warmth in perfect balance. Our pellet stoves feed themselves from a large hopper and hold your chosen temperature with a digital controller.
The PC 120 is part of our Pellet collection, where you can compare every size and finish side by side.
PC 120 pellet stove – frequently asked questions
How large an area does the PC 120 heat, and how many pellets does it use?
The PC 120 is rated for about 120–150 m² and uses 1.7–3.5 kg of pellets per hour, depending on the power setting. Insulation, ceiling height and climate all affect the real heating area, so share your floor plan if you would like us to confirm the right size.
How long does a full hopper last on the PC 120?
The PC 120 holds 24 kg of pellets. At 1.7–3.5 kg/h, a full hopper lasts roughly 6–14 hours, depending on the thermostat setting and how much heat the room demands. Lower settings stretch the burn time; running at full power on a cold day shortens it.
Which pellets should be used in the PC 120?
We recommend certified ENplus A1 wood pellets. Consistent quality means less ash, a cleaner burn pot and fewer service calls. Poor pellets with high ash or dust content can block the auger and reduce performance, so advise your customers to buy from a reliable supplier.
Is the PC 120 available for OEM, and what are the MOQ and lead time?
Yes. The PC 120 can carry your logo, colour, packaging and multilingual manuals, and can be mixed with other models in one container at a low trial MOQ. Standard models usually ship 30–45 days after deposit. Pellet electronics and other spare parts are available for after-sales service.
Which test documents are available for the PC 120?
Test reports and declarations for the relevant standard for pellet stoves, EN 14785, are available on request for qualified models. Importers should check the rules of their market before ordering. For reliable operation we recommend wood pellets certified to ENplus A1. Tell us where you sell the PC 120 and we will confirm which documents apply.
